Vendor:

Suction extractor fan 160mm 90°, exhaust fan, chimney fan

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Height: 300 mm smoke pipe diameter: 160 mm

Vendor:

Suction Extractor Fan 160mm Exhaust Fan Chimney Fan Smoke Extractor

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Width: 200 mm Height with motor: 340 mm smoke pipe diameter: 160 mm

Vendor:

Suction extractor fan 180mm 90°, exhaust fan, chimney fan

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Height: 300 mm smoke pipe diameter: 180 mm

Vendor:

Suction Extractor Fan 180mm Exhaust Fan Chimney Fan Smoke Extractor

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Width: 200 mm Height with motor: 340 mm smoke pipe diameter: 180 mm

Vendor:

Suction extractor fan 200mm 90°, exhaust fan, chimney fan

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Height: 300 mm smoke pipe diameter: 200 mm

Vendor:

Suction Extractor Fan 200mm Exhaust Fan Chimney Fan Smoke Extractor

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Width: 230 mm Height with motor: 360 mm smoke pipe diameter: 200 mm

Vendor:

suction motor 1560 watts

230 volts Total height: 182 mm Diameter: 144 mm Suitable for our pellet vacuum cleaner article no. 75300 and 75400 as well as the suction systems 72000, 73000, 74000, 75000, 78000 and 79000

Vendor:

suction motor 1650 watts

230 volts Total height: 219 mm Diameter: 183 mm fit in our suction turbine article no. 75002 and in the suction systems 76000 and 77000

Vendor:

suction hose 15m for pellet transport

NW 50 mm

Vendor:

suction hose 20m for pellet transport

NW 50 mm

Vendor:

suction hose 25m for pellet transport

NW 50 mm

Vendor:

suction hose sold by the meter

NW 50 mm

Vendor:

Suction probe for pellet suction system

Pellet suction probe for 50 mm hose. Connection for suction and exhaust air. Height 120 mm, width 155 mm, total depth 210 mm. The suction probe can be screwed onto the silo floor. Delivery without screws.

Vendor:

Suction turbine for pellet suction system

Connections for hose with 50 mm NW Ø 330 mm Height including connection piece 450 mm

Vendor:

Schalter am Minilader (Neues Modell ab Baujahr 2014)

Schalter für Minilader.

Vendor:

fireclay lining of the HSS burner

consisting of: left stone right stone front stone approx. 50cm 10mm seal

Vendor:

firebrick for burner drawer

for Vigas 15, 25 and 40 with AK2000 or Turbomatic control 5 pieces are required for Vigas 25 and 40 with AK3000 8 pieces are required for Vigas 49 and 60 9 pieces are required for Vigas 80 13 pieces are needed

Vendor:

clamp for the suction hose

for suction hose or pipe 20 mm, Dm 56-59

Vendor:

Schiebemuffe

• Ein System für Sanitär- und Heizungsanlagen• Gemäß UBA-Positivliste für Trinkwasser geeignet• Fittingkörper aus Kupfer/Rotguss• O-Ring aus EPDM (Farbe schwarz)• Unverpresst undicht• Druckluft max.: 16 bar• Temperatur bei Warm- und Kaltwasser max.: 95°C / Druck max.: 10 bar• Temperatur bei Heizungsinstallationen max.: 110°C / Druck max.: 6 bar• VC 5243

Vendor:

Sonnen-Pellet-Mole® - Set

for connection to the suction system the mole "eats" its way from top to bottom through the pellet storage when it comes into contact with the ground it starts to "wander" Scope of delivery: - Solar Pellet Mole® with electric drive - 5 m suction hose including rubber cable for...

Vendor:

clamping ring

Vendor:

Stahl Abgasbögen für Vigas

Die unlackierten Stahl Abgasrohrbögen sind speziell für Vigas Holzvergaser Heizungen in verschiedenen Größen ausgelegt. Aus robusten Material, sorgt für eine effiziente Ableitung von Abgasen und somit für eine optimale Leistung der Heizung. Ein zuverlässiges und langlebiges Zubehör für Ihre Vigas Heizung. Genaue Maße der Bögen können Sie dem jeweiligen Artikelbild...

Vendor:

Stahl Abgasrohr für Vigas

Das unlackierte Stahl Abgasrohr ist speziell für Vigas Holzvergaser Heizungen in verschiedenen Größen ausgelegt. Aus robusten Material, sorgtm für eine effiziente Ableitung von Abgasen und somit für eine optimale Leistung der Heizung. Ein zuverlässiges und langlebiges Zubehör für Ihre Vigas Heizung.Technische Daten: Material: StahlTemperaturbeständigkeit: 600°CEinstecktiefe: 50mmNutzlängen: 250mm = 200mm500mm =...

Vendor:

dust separator for pellet suction system

The dust separator filters the dust from the return air and thus prevents the dust from getting back into the pellet storage. The height is approx. 73 cm and the diameter approx. 34 cm. The hose connections are for 50mm hose and two clamps for fastening are included.