Vendor:

Smoke extractor chimney fan heating aid stainless steel chimney 120 to 160mm

Vendor:

Reduziermuffen

• Ein System für Sanitär- und Heizungsanlagen• Gemäß UBA-Positivliste für Trinkwasser geeignet• Fittingkörper aus Kupfer/Rotguss• O-Ring aus EPDM (Farbe schwarz)• Unverpresst undicht• Druckluft max.: 16 bar• Temperatur bei Warm- und Kaltwasser max.: 95°C / Druck max.: 10 bar• Temperatur bei Heizungsinstallationen max.: 110°C / Druck max.: 6 bar• VC 5243

Vendor:

Reduzierstücke

• Ein System für Sanitär- und Heizungsanlagen• Gemäß UBA-Positivliste für Trinkwasser geeignet• Fittingkörper aus Kupfer/Rotguss• O-Ring aus EPDM (Farbe schwarz)• Unverpresst undicht• Druckluft max.: 16 bar• Temperatur bei Warm- und Kaltwasser max.: 95°C / Druck max.: 10 bar• Temperatur bei Heizungsinstallationen max.: 110°C / Druck max.: 6 bar• VC 5243

Vendor:

Reduction from 150 to 130

Vendor:

Reduction from 200 to 150

Vendor:

Reduction from 200 to 160

Vendor:

Reduzierungen für Stahlabgasrohr Vigas

Diese Reduzierungen sind für verschiedene Durchmesser von Abgasrohren passend. Sie können damit Ihr Stahlabgasrohr effizient an verschiedene Geräte anschließen und so die Interferenz minimieren. Mit einer perfekten Passform garantieren sie eine optimale Leistung Ihres Abgassystems.

Vendor:

photo sensor violet

Flame detector for Pelltech up to approx. year of manufacture 2011

Vendor:

Control for suction system with mole

Vendor:

Control for suction system with probe

Pre-assembled and ready to plug in. Mating connectors are included

Vendor:

Relais

Relais von Finder mit Schaltleistung 15 Ampere. Saugmotoren haben zwischen 1500 und 2000 Watt und kein Anlaufkondensator. Deswegen kommt es schon mal nach Jahren wegen der Hohen Schaltleistung zu Ausfällen!

Vendor:

Repair kit Promat door Pelltech RSP20-40

The set fits in the door of the RSP20, RSP30 and RSP40 Consists of Promat plate, seal and adhesive. The Promat plate (500x340) is roughly pre-cut and must be individually adjusted on site with a distance of 1.9 cm (for the door seal) (with a saw and/or knife)

Vendor:

Pipe insulation 90° bend, 13mm insulation, 15-42mm inner diameter, self-adhesive

Save money and insulate your hot water pipes. We offer you the following material for insulation: self-adhesive insulation thickness 13 mm With double-sided self-adhesive closure High adhesive strength Was developed according to EnEV and DIN 1988 Part 2 Fire behavior: (DIN 4102) B1 Thermal conductivity: (DIN 52 613) l =...

Vendor:

Pipe insulation for floor, 1 meter, 9 mm insulation, 15 - 35 mm diameter

With its rectangular shape, the CLIMAFLEX® naturefoam exzentro pipe insulation fits seamlessly into any screed substructure. Because it leaves no room for weak spots, it improves impact sound insulation and the stability of the floor. At the same time, it is more compact than comparable concentric pipe insulation. This allows...

Vendor:

Pipe insulation Stabil red, 1 meter, 13 mm insulation, 15 mm diameter

A robust outer skin characterizes the insulation material CLIMAFLEX® naturefoam stable. This can withstand strong external influences and guarantees the protection of the insulation underneath. This ensures that the system remains fully functional, particularly under harsh construction site conditions. CLIMAFLEX® naturefoam stabil is suitable for all systems in the sanitary...

Vendor:

Pipe insulation T-piece, 13mm insulation, 15mm inner diameter, self-adhesive

PIPE INSULATION FOR T-PIECES FROM 15MM TO 42MM INTERNAL DIAMETER. Simply select the outer diameter of your hot water pipe or water pipe. We will then supply you with the appropriate T-piece. Save money and insulate your hot water pipes. We offer you the following material for insulation: PE-XT self-adhesive...

Vendor:

Pipe insulation, 1 meter, 13 mm insulation, diameter 15 - 42 mm, self-adhesive

1 meter pipe insulation self-adhesive insulation thickness 13 mm What makes this insulation so special? The pipe insulation is self-adhesive on both sides. This means that this insulation can be installed quickly and without the use of additional adhesives. Simply cut to size, place around the pipe, peel off the...

Vendor:

pipe connector for suction hose

50 mm diameter

Vendor:

Suction extractor fan 120mm 90°, exhaust fan, chimney fan

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Height: 300 mm smoke pipe diameter: 120 mm

Vendor:

Suction extractor fan 120mm, exhaust fan, chimney fan

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Width: 200 mm Height with motor: 340 mm smoke pipe diameter: 120 mm

Vendor:

Suction extractor fan 130mm 90°, exhaust fan, chimney fan

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Height: 300 mm smoke pipe diameter: 130 mm

Vendor:

Suction Extractor Fan 130mm Exhaust Fan Chimney Fan Smoke Extractor

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Width: 200 mm Height with motor: 340 mm smoke pipe diameter: 130 mm

Vendor:

Suction extractor fan 150mm 90°, exhaust fan, chimney fan

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Height: 300 mm smoke pipe diameter: 150 mm

Vendor:

Suction extractor fan 150mm, exhaust fan, chimney fan, smoke extractor

Max. temperature: 600 °C Engine speed: 2800 rpm Power: 60 W Mains voltage: 230/50 V/Hz Protection class: IP20 Weight: 13 kg Max. Temp. Motor: 80 °C Overall length: 400 mm Width: 200 mm Height with motor: 340 mm smoke pipe diameter: 150 mm